$490.00 AUD $430.00 AUD - Sold Out
The mst vintage is a small, analogue speedometer with a brass bezel in an appealing 'old school' look.
The design is different, but technically it is identical to the motoscope tiny. The dial is based on the streamline design of the 40's and 50's. Additionally, it features a yellowed and cracky surface giving the dial its extremely aged look.
The bezel and indicator are made from solid brass and have been manually coated with patina. The created patterns and signs of aging vary with each instrument and give it an individual and unique look.
The mst Vintage is a very compact, analogue 49 mm speedometer. Speed is digitally measured and precisely displayed via stepping motor and indicator.
The installation diameter of 49 mm and the installation depth of only 24 mm provide various installation options.
The high quality aluminium casing is turned from solid metal and its surface is anodized black. The casing is 100% water-tight and resistant to vibrations.
The analogue dial is indirectly illuminated by white LEDs. The innovative LED display is hidden behind the black part of the dial and only visible through the dial while operating, not when switched off. The LED luminosity is automatically adjusted to achieve optimal readability in dark, sunlight and dawn conditions.
If the speed exceeds the 200 km/h on the analogue scale, it is automatically displayed in the LED display. The maximum speed is recorded as well. The 4 indicator lights (blue, red and 2 x green) are also integrated into the dial. These lights are only visible when operated, too.
You can toggle between the different informations on the LED display by operating the supplied menu push-button or e.g. the headlight flasher push-button on the handle bar.
Default value on the display is the time. If needed, a short actuation of the push-button will display the values of total distance, day trip, on-board voltage etc.
All functions are easy to operate with the push-button, e.g. day trip, reset or the like. Default settings or recorded values are of course stored even with the power supply switched off.
The motoscope tiny is easy to install with the two M3 threaded holes on the back side. There are various motogadget brackets available for installation. Refer to 'Brackets'.
Connection and Sensors
The detailed installation and operating instructions (refer to 'Downloads') help with the connection of instrument even for users without any previous experience in handling the vehicle's electrical system.
The supplied speedometer sensor in stainless steel is very small (M5/23 mm) and therefore easy to hide. The sensor can be easily installed on front or rear wheel with the connector cable (1.5 m long). This allows for the easy conversion of an originally mechanical speedometer drive on a motorbike.
The motoscope tiny is compatible with various original speedometer sensors (dry reed contact and proximity sensors) of the motorbike manufacturers. In this case, the terminals have to be connected only and the mechanical sensor installation will be completely obsolete.
An intelligent 'Teach Function' allows for the easy calibration of the speedometer - even on vehicles with transmission sensors, e.g. Harley Davidson.
Specifications and Features
Mounting diameter: 49 mm
Weight: approx. 110 g
Mounting: 2 x M3 threaded hole
Power consumption, operating: approx. 200 mA (load dependent)
Operating voltage: 9 V - 15 V
Operating temperature: -20°... +80°C
Speedometer, analogue (needle): 0 – 200 km/h or mi/h
Speedometer, numeric (LED display): 200 – 999 km/h or mi/h
Max. speed: 0 – 999 km/h or mi/h
On-board voltage: 9 – 15 V
Clock: 00:00 – 23:59
Trip meter: 0 – 999.9 km or mi
Total distance (adjustable): 99999 km or mi max.
Indicator lights: turn signal, high beam, neutral, hazard light
Includes free shipping to VIC, SA, ACT, NSW, & QLD. For other states, we will contact you regarding additional payment - usually $10 per tyre. Section width: 4.84" of tyres available to Australian addresses only, sorry.
$50.00 AUD $48.00 AUD
Doherty-replica, single-pull throttle/twistgrip for 7/8" or 1" bars. Smooth-action and a great classic look. Includes a pair of Jackhammer grips. Note: throttle comes with right hand grip pre-installed, left hand grip loose. Satin-black finish over aluminium body with aluminium sleeve with cable and throttle tension adjuster. Overall...
PRE-ORDER NOW, DISPATCHES IN 2 TO 4 WEEKS. m.unit battery cable with inline 40 amp fuse.This high quality copper cable has high conductivity and comes with an integrated fuse holder, 2 fuses, 2 cable eyelets for crimping and 2 pieces of heat shrink tubing. One...