$90.00 AUD $82.00 AUD
Use this in combination with the m.unit blue, m.unit basic or m.unit V2 to reduce cable clutter and simplify your wiring harness.
Integrated into the handlebar tube (or other suitable location) this tiny cylinder will electrically connect all handlebar instruments, switches and buttons. All these signals are then sent from the handlebars to the m.unit using just one, thin wire!
Using state-of-the-art bus technology, the m.button digitally processes signals and transmits them to the m.unit blue or m.unit basic over a thin cable.
The electrical consumers will then be switched inside the m.unit.All control wires are moved into the handlebar. This saves space, weight, labour and time. A 'must have' for custom bikes with clean-look handlebars.
a) normally, the operating current (e.g. headlight or turn signals) is transmitted directly via the wiring of the handlebar switches. Due to the high currents, cables with large cross-sections have to be routed from the fuse box to the switch and back to the electrical consumer.
The result: big cable bundles. Definitely, a 'no go' for custom bikes with restricted space or a concealed electrical system.
b) using the m.unit without the m.button, just a thin cable for each switch- or button-controlled feature has to be routed to the m.unit. These cables only carry minute control currents. All high loads and currents are switched directly at the m.unit and transmitted directly to the electrical consumers. This already leads to a significant reduction and simplification of the wiring harness. Here you can see the example of a circuit diagram.
c) using the m.unit blue or m.unit basic in combination with the tiny m.button, you will once again reduce the amount of cables that have to be routed! All switches/buttons on the handlebar are connected at the shortest distance possible and concealed inside the handlebar. Consequently, you will have to route only ONE thin cable from the m.button to the m.unit. All loads and currents will be switched directly at the m.unit blue or m.unit basic (see explanations above). A layout reduced to the max! Here you can see the example of a circuit diagram with use of m.button.
The m.button is completely moulded in, making it water-tight and resistant to vibrations.
$450.00 AUD $405.00 AUD
These have become an essential element to our full custom wiring harnesses. Makes for a tidy, efficient and reliable electrical system. I don't know how we ever wired up without them!! The new m.unit basic without Bluetooth® LE has moved on from the established m.unit...
$550.00 AUD $495.00 AUD
These have become an essential element to our full custom wiring harnesses. Makes for a tidy, efficient and reliable electrical system. I don't know how we ever wired up without them!! The new m.unit blue has moved on from the established previous version by undergoing...
$125.00 AUD $100.00 AUD
The mo.unit Cable Kit is a ready made set of cables to aid in the assembly of a wiring harness. This cable kit consists of top grade copper-strand cables and will help you doing quick work of creating a new wiring harness. Parts delivered Cable...