Motogadget motoscope mini, Digital Speedo/Tacho, Black
$410.00 AUD
Black anodised. The motoscope mini is a highly compact digital instrument for motorbikes, measuring just 59mm x 21.5mm x 13mm. The LED display we created for the motoscope mini is unique in the instrument realm. 251 ultra bright LEDs provide for an essentially rimless and...
Motogadget motoscope mini, Digital Speedo/Tacho, Polished
$418.00 AUD $395.00 AUD
Polished aluminium finish. The motoscope mini is a highly compact digital instrument for motorbikes, measuring just 59mm x 21.5mm x 13mm. The LED display we created for the motoscope mini is unique in the instrument realm. 251 ultra bright LEDs provide for an essentially rimless...
Mount with Indicator Lights (Combi Frame) for msm - Black
$175.00 AUD - Sold Out
The msm combi frame allows installation of motoscope mini to the handle bar with additional mounting hardware. 5 indicator lights and series resistors are pre-installed. The device is machined from solid aluminium and anodised black.The combi frame comes with approx. 50 cm cable, screws and...
Mount with Indicator Lights (Combi Frame) for msm - Polished
$185.00 AUD - Sold Out
The msm combi frame allows installation of motoscope mini to the handle bar with additional mounting hardware. 5 indicator lights and series resistors are pre-installed. The device is machined from solid aluminium and has a polished finish. The combi frame comes with approx. 50 cm cable,...
from $110.00 AUD
Handlebar Clip Kit & Bracket for motoscope mini with Combi Frame
$130.00 AUD $110.00 AUD
This product allows mounting the motoscope mini with combi frame directly to the handlebars without the need to drill them. Includes mounting bracket, handlebar clip-kit and screws. The combi frame and the motoscope mini are not included.
from $65.00 AUD
Handlebar Bolt-On Bracket for motoscope mini
$90.00 AUD $65.00 AUD
BLACK IN STOCK NOW. POLISHED AVAILABLE TO PRE-ORDER, DISPATCHING IN 2 TO 4 WEEKS* In connection with the combi Frame, the Handle Bar Bolt-On Bracket is used to mount the motoscope mini to the handlebar. The handlebar has to be drilled. Mounting bracket and required parts included....
from $85.00 AUD
Handlebar Clip Kit for motoscope mini
$110.00 AUD $85.00 AUD
The Handle Bar Clip Kit allows mounting the motoscope mini or motosign mini directly to the handlebar. Kit includes: Two clamps with stainless steel mounting screws.
msm H-D Handle Bar Top Clamp - Black
$325.00 AUD - Sold Out
The msm H-D Handle Bar Top Clamp 1 inch with indicator lights allows the motoscope mini to be mounted on the triple clamp of almost all Harley-Davidson™ bikes. The product includes 5 indicator lights with integrated series resistors, 4 bolts of stainless steel and approx. 50...
msm H-D Handle Bar Top Clamp - Polished
$335.00 AUD
PRE-ORDER NOW, DISPATCHES IN 2 TO 4 WEEKS The msm H-D Handle Bar Top Clamp 1 inch with indicator lights allows the motoscope mini to be mounted on the triple clamp of almost all Harley-Davidson™ bikes. The product includes 5 indicator lights with integrated series resistors,...
msm Metric Handle Bar Top Clamp (Black)
$280.00 AUD
The msm Metric Handle Bar Top Clamp 22mm with indicator lights allows the mounting of the motoscope mini on superbike bridges with a hole spacing of 33mm x 85mm. This applies to most superbike bridges from LSL, ABM, Rairotec, Lucas, MFW, Spiegler etc.. It is...
msm Metric Handle Bar Top Clamp (Polished)
$290.00 AUD
The msm Metric Handle Bar Top Clamp 22mm with indicator lights allows the mounting of the motoscope mini on superbike bridges with a hole spacing of 33mm x 85mm. This applies to most superbike bridges from LSL, ABM, Rairotec, Lucas, MFW, Spiegler etc.. It is...
9-core Instrument Cable (poor-man's mo.button)
$45.00 AUD - Sold Out
For the extension of connection cables on motogadget instruments. Could also be used in place of a mo.button, connecting handlebar controls to the mo.unit with one, neat cable! 9-wires. 2 metres in length.
mo.can OBD Digital Adapter for for Harley-Davidson
$159.00 AUD
PRE-ORDER NOW, DISPATCHES IN 2 TO 4 WEEKS The mo.can OBD is a digital adapter for easy connection of motogadget instruments directly to the diagnostic interface of Harley-Davidson™ vehicles built from 2004 onwards. Plug & Drive, it couldn't be easier. A tiny box makes the...
Ignition Signal Sensor - Motogadget
$85.00 AUD - Sold Out
Ignition signal sensor (rev signal) used for nearly all capacitor discharge ignition coils and other ignition coils with poor quality ignition signals. Directly mounted to the ignition cable (high voltage cable). Not compatible with plug top coils / pencil coils.
Motogadget motosign mini, Warning Light Cluster, Black
$150.00 AUD
Extremely compact warning light cluster from motogadget featuring 5 coloured LED's. Billet aluminium with black anodised finish. Mounts via M3 x 0.5 pitch thread in the rear. Length: 46.3mm Width: 7mm Depth: 13mm Harness length: 50cm Weight: 30g Operating Voltage: 9-18 V
Motogadget motosign mini, Warning Light Cluster, Polished
$155.00 AUD
PRE-ORDER NOW, DISPATCHES IN 2 TO 4 WEEKS Extremely compact warning light cluster from motogadget featuring 5 coloured LED's. Billet aluminium with polished finish. Mounts via M3 x 0.5 pitch thread in the rear. Length: 46.3mm Width: 7mm Depth: 13mm Harness length: 50cm Weight: 30g Operating Voltage: 9-18...
Universal Mounting Bracket for motoscope mini Combi Frame, Black
$60.00 AUD - Sold Out
The black anodized aluminium msm combi mounting bracket allows for easy mounting of the msm combi frame to the triple clamp or other parts. For custom cutting and drilling. Instrument and msm combi frame not included. Please order separately. Length: 130mm Width: 33mm
Universal Mounting Bracket for motoscope mini Combi Frame, Polished
$72.00 AUD $69.00 AUD
The polished aluminium msm combi mounting bracket allows for easy mounting of the msm combi frame to the triple clamp or other parts. For custom cutting and drilling. Instrument and msm combi frame not included. Please order separately. Length: 130mm Width: 33mm
Speedo Sensor (M5) - Motogadget
$58.00 AUD
The highly compact M5 reed contact is a spare part for the included speedometer sensors. The stainless steel reed contact fits all motogadget instruments. Industrial-grade quality (IP68). Used to detect magnets on rotating parts. M5 x 0.5 fine-pitch thread, length 22 mm, incl. 2 nuts....
