$68.00 AUD
The mo.flash is by far the most compact load independent flasher relay on the market. Nothing comes close in size and simplicity. The mo.flash flasher unit substitutes all conventional flasher relays.
The mo.flash substitutes a conventional flasher relay. This flasher relay usually is implemented BEFORE the indicator switch. The most convenient way to mount the mo.flash is to simply search and replace the original relay.
The mo.flash can NOT replace the push-button controls of a push-button instrument. Please refer to our m-Relay+ if you are looking for a flasher relay for push-buttons.
Newer Harley-Davidson model series use a special module to control the flasher controls (TSM/TSSM). These modules can NOT be replaced or complemented by them.flash.
Casing L x W x H: 18 mm x 13 mm x 9,5 mm
Connector cable length: approx. 2 x 50 mm
Weight: approx. 4g
$60.00 AUD $52.00 AUD
Universal solid state rectifier and regulator. Replaces both your regulator and rectifier, or diode and rectifier. Not suitable for electro-magnet alternators. For permanant magnet alternators only. For single or 3-phase alternators (simply ignore one of the three yellow wires for single phase). Dimensions: 80mm x...
$90.00 AUD $72.00 AUD
Solid state rectifier and regulator with built in capacitor. Just like the Podtronics units, but without the branding! Can be used with battery as a standard regulator/rectifier or without a battery (only if your bike's charging system produces enough power at idle speeds).IMPORTANT NOTE: If...
$54.00 AUD $29.00 AUD
MADE IN EU Save space & weight with this battery eliminator. Measures a tiny 36mm in diameter & 62mm in length. Weight: 70 grams! Screw terminal size: M5. Simply attach the leads that normally go to the battery terminals to the screw terminals on the...