motogadget mo.switch mini, 1" (Black Edition)
AUD225.00 AUD195.00
PRE-ORDER NOW, DISPATCHES IN 3 TO 5 WEEKS.
Limited Edition!
The small, push-button switch-block made of aluminium for 1" handlebars in black.
The mo.switch mini is a high quality, universal push-button switch-block for 1" handlebars in a minimalistic and elegant design.
These finely CNC machined hand controls in combination with an electronic push-button control unit (not included in kit) like a motogadget mo.unit, can be used to operate all electrical features, e.g. lights, turn signal, electric start, horn, etc.
The casing is milled from solid billet aluminium and anodised for a completely black look, without the contrast cut of the standard black version. Two flush, built-in M5 stainless steel mounting screws ensure secure and stable clamping of the switch-block to all handlebars.
The three miniature push-buttons have a defined pressure point and are set into recesses that give your thumb the necessary orientation. The push-buttons are protected against splash water and of very robust design.
The individual wires come soldered and sealed watertight, ready to use. All that is left to do is drill a hole in the handlebar for the thin cable, and the 200cm cable gives you plenty of length for installation.
If a large throttle grip leaves no room for a mo.switch mini on the right-hand side, two units can be mounted on the left-hand grip instead. With six buttons and symmetrical milling, the pair makes a real eye-catcher.
Please note: it is not possible to connect loads up directly to the switch. A control unit such as the mo.unit or mo.relay+ must be used to interface between the load and the switch. You could also use the mo.switch mini to control other accessories such as starter and horn without a mo.unit with the use of 12V relays so long as the load rating of the relay coil is 50mA or less. Note that mo.switch mini buttons are momentary, so not practical for headlight control unless you find suitable latching relays.
Specifications
Inner diameter: 25.4mm (1")
Outer diameter: 45mm
Width: 14mm
Length of cable: 200cm
